Ahoj pani. Mam velmi zaciatocnicku otazku ohladne "queues". Ako najednoduchsie vyriesit "shaping" na tiku na ktorom je 30 VLAN ale ja chcem orezavat iba tok smerom do/z internetu, nie medzi tymito VLAN. Je nutne pouzit packet mark alebo je jednoduchy sposob ktory som nenasiel? Popripade ak by mi niekto zhodnotil ci idem na to spravne podla prilozenych prikazov?
Dakujem velmi pekne.
mangle
0 chain=forward action=mark-packet new-packet-mark=vlan1_up passthrough=yes
src-address=192.168.0.0/24 dst-address=0.0.0.0/0 out-interface=ether1_WAN
1 chain=forward action=mark-packet new-packet-mark=vlan10_up passthrough=yes
src-address=192.168.10.0/24 dst-address=0.0.0.0/0 out-interface=ether1_WAN
2 chain=forward action=mark-packet new-packet-mark=vlan1_down passthrough=yes
src-address=0.0.0.0/0 dst-address=192.168.0.0/24 in-interface=ether1_WAN
3 chain=forward action=mark-packet new-packet-mark=vlan10_down passthrough=yes
src-address=0.0.0.0/0 dst-address=192.168.10.0/24 in-interface=ether1_WAN
queue
1 name="queue1" target-addresses="" interface=all parent=none
packet-marks=vlan1_up direction=upload priority=8
queue=default-small/default-small limit-at=0/0 max-limit=60M/60M
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small
2 name="queue2" target-addresses="" interface=all parent=none
packet-marks=vlan1_down direction=both priority=8
queue=default-small/default-small limit-at=0/0 max-limit=60M/60M
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small
3 name="queue3" target-addresses="" interface=all parent=none
packet-marks=vlan10_up direction=upload priority=8
queue=default-small/default-small limit-at=0/0 max-limit=50M/0
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small
4 name="queue4" target-addresses="" interface=all parent=none
packet-marks=vlan10_down direction=download priority=8
queue=default-small/default-small limit-at=0/0 max-limit=0/50M
burst-limit=0/0 burst-threshold=0/0 burst-time=0s/0s
total-queue=default-small
