Nejak to nejde, tady jsem vypsal NAT
;;; Mikrotik dsNAT
chain=dstnat action=dst-nat to-addresses=192.168.1.254 to-ports=8291
protocol=tcp dst-port=8291 log=no log-prefix=""
1 ;;; VPN dsNAT
chain=dstnat action=dst-nat to-addresses=192.168.1.254 to-ports=1723
protocol=tcp dst-port=1723 log=no log-prefix=""
2 chain=srcnat action=masquerade out-interface=Eth3_O2 log=no log-prefix=""
3 ;;; kamery dsNAT
chain=dstnat action=dst-nat to-addresses=192.168.1.100 to-ports=18004
protocol=tcp dst-port=18004 log=no log-prefix=""
4 ;;; masquarade
chain=srcnat action=masquerade to-addresses=10.0.0.125
out-interface=Ether1_Uplink log=no log-prefix=""
5 ;;; NAT provozu pri preklopeni linky z air na O2
chain=srcnat action=add-src-to-address-list address-list=10.0.0.125
address-list-timeout=0s out-interface=Eth3_O2 log=no log-prefix=""
6 ;;; remote desktop dsNAT
chain=dstnat action=dst-nat to-addresses=192.168.1.250 to-ports=3389
protocol=tcp in-interface=Ether1_Uplink log=no log-prefix=""
a v ip pravidlech nemám nic.
v tom Mk je v route
/ip> route print
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 ADC 10.0.0.0/24 10.0.0.125 bridge-local 0
1 A S 192.168.1.0/24 10.0.0.126 1
